A roof replacement is a chance to put the whole covering back in order. We'll help you understand what needs replacing, what can stay and what belongs in the work, starting with a free roof inspection.
New shingles need a dependable base. When the old covering comes off, the condition of the decking, roof edges and joints becomes part of the replacement decision. Covering over a soft area or leaving a failed wall connection in place can carry the old problem into the new roof.
For a Lawton home with widespread brittle shingles, repeated leaks in different places or extensive storm damage, replacement may make more sense than another series of separate repairs. A limited failure in otherwise workable roofing can still be a repair. We start with that distinction, before the color choices.
If the problem is confined to one part of the roof, our roof repair service explains how a smaller scope can join into sound surrounding material. Replacement earns its place when the condition and extent of work justify it.
The visible covering is only part of the project. The sequence needs to protect the house while the old roof is open and connect each new layer correctly.
Access, material delivery and disposal need space. The work plan should account for doors, parked vehicles, plants and anything beneath the roof edge. Weather and the amount of roof that can be protected at a time help determine the sequence.
Tear-off exposes the wood that supports the fasteners. Deteriorated sections need an appropriate repair before new roofing goes on. The extent may only become clear after removal, which is why concealed deck work needs a way to be addressed in the project scope.
Underlayment, edge metal, valleys, pipe flashings and roof-to-wall details must work together. Shingles overlap in courses, but those interruptions need their own connections. A new surface does not compensate for flashing that still directs water beneath it.
Roof ventilation should be considered with the existing intake and attic arrangement. Ridge and hip caps, penetrations and edges complete the covering. Debris collection and a final look at the completed details are part of bringing the roofing work to a close.
| Option | What changes | What still needs checking |
|---|---|---|
| Architectural shingles | Laminated construction creates a more dimensional appearance than a flat three-tab pattern. | The exact product, fastening instructions and roof slope. |
| Impact-rated shingles | A tested impact classification is an additional product characteristic. | The rating is not a promise against hail damage or an automatic insurance discount. |
| Designer shingles | Different shapes, thicknesses and profiles change the roof’s appearance. | Weight, accessories, availability and the complete installed scope. |
Our shingle options guide compares construction, impact ratings and appearance.
Roof size matters, but so does the route the new roofing has to follow. Valleys, dormers and wall joints mean more cuts and connections than a simple uninterrupted slope. Access, the number of old layers and repairs beneath them also affect the work.
For an early Lawton replacement budget, use the roof cost calculator. It shows how roof area affects the starting figure; removal, repairs and material selection complete the project scope.
Living space is not the same measurement as roof surface. An attached garage, overhangs and pitch can change the area, while a second story adds living space without necessarily doubling the roof.
Field shingles, starter, caps and compatible underlayment belong together in the material choice.
Existing layers and access change how the old covering is handled.
Decking and concealed connections can expand the work after the roof is opened.
This addresses specified product defects or other named coverage under that warranty. It has an issuer, conditions and a remedy. A long term on a brochure does not mean every future leak, labor cost or storm loss is covered.
Understand roof warranty termsWorkmanship coverage belongs to the contractor and the actual agreement. The proposed roof system, ventilation and required accessories can also affect product coverage.
A recover is not suitable for every roof. Existing layers, deck condition, trapped moisture, weight, local requirements and the selected product all matter. Tear-off provides access to the base and concealed details; a roof with deterioration underneath should not simply have another covering added.
No. A porch or addition with a low slope may need a different roofing system from the steeper main roof. The change between systems needs a deliberate flashing detail. Choosing shingles for the main house does not establish that they suit every attached roof.
Size, access, roof shape, weather and any supporting repairs determine the work sequence. An occupied home also needs a plan for entrances and daily activity. Those details should be settled with the contractor for the actual project.
One leak is not enough to decide. A failed pipe boot or wall flashing can sometimes be repaired while the surrounding covering remains useful. Widespread deterioration or repeated failures can change that answer.
A free roof inspection is a useful first step when the extent is unclear.
Tell us what is happening with the roof and what you’re planning for the home. We’ll help you start with its condition and the work it needs.